NewsAdGraam raises ₹3 crore in seed funding
AI Video & Image News

MiniMax-H3-Image 2-Step LoRA: 33B, 4096² Specs

AdGraam News Desk5 min read
A prism condensing six light beams into two, symbolizing a faster image generation schedule

The short answer

@_akhaliq released a community pDMD 2-step LoRA for MiniMax-H3-Image on 2026-11-10, cutting the stock 6-step schedule to 2 denoising evaluations. The base model is a 33.1B transformer with native 4096×4096 output. The LoRA, a 40 GB one-file ComfyUI checkpoint and a ZeroGPU demo Space are on Hugging Face.

On this page (10 sections)

What is the MiniMax-H3-Image 2-step LoRA?

It is a community add-on for MiniMax's 33B image model that cuts generation from 6 denoising steps to 2. @_akhaliq posted it on 2026-11-10 as a pDMD LoRA with a one-file ComfyUI checkpoint and a realtime editing app on ZeroGPU.

A Reddit thread in r/StableDiffusion picked it up the same day and had 15 likes at the time of writing. The X post had 2 likes and about 1,000 views. MiniMax has not announced this LoRA.

For the base model, see our earlier coverage: MiniMax H3-Image Is Out: Open Weights, 4K, 16 Refs.

The Hugging Face card says the stock checkpoint is step-distilled for a fixed 6-step PDD schedule. At 2 steps the stock model is still mid-denoise, and the card describes the output as soft, low-contrast and unfinished. The LoRA is meant to fix that, and the card says the stock checkpoint cannot be driven below 6 steps at all.

MiniMax-H3-Image 2-step LoRA key specs

The LoRA targets the official 33.1B image transformer at its native 4096×4096 (16 MP), with no CFG and prompts as written. It is rank 128 over attention and FFN across all 50 blocks, based on the pDMD method (arXiv 2609.35768). All speed figures below come from the model card's author.

A GPU server rack producing a large high-resolution printA GPU server rack producing a large high-resolution print

SpecDetails
Base modelMiniMaxAI/MiniMax-H3-Image, 33.1B transformer
MethodpDMD 2-NFE LoRA, rank 128, 50 blocks
Native resolution4096×4096 (16 MP)
Steps2 (stock: fixed 6-step schedule)
GuidanceNo CFG, positive prompt only
Speed, 4096²~17.7 s per image on one H200 (peak 84 GB)
Speed, 2048² in ComfyUI~20 s on an H200 (bf16 DiT, int8 text encoder)
Demo previews~1 MP, ~1 to 1.5 s per 2-step frame
Realtime edit~0.9 s per frame on the Space's FP8 build
One-file checkpoint40 GB bf16, LoRA pre-merged
LoRA-only~2 GB
LicenseNot stated in the card excerpt

The repo ships the LoRA in diffusers layout (bf16, byte-identical to the upstream pDMD release), a ComfyUI-layout conversion by Iwannapose, the one-file checkpoint and a pre-converted diffusers transformer. The card notes the official image checkpoint has no audio weights, so unused audio-branch tensors are zeros.

The sample grids on the card use the same twelve prompts at 4096×4096, 2 steps, flow shift 12 and seed 3. That makes tile-by-tile comparison possible, but the grids are the author's own.

How do I run the 2-step LoRA in ComfyUI?

The card describes two paths, both verified by the author on ComfyUI master as of 2026-11-10 with the official Comfy-Org repack. Settings are 2 steps, euler sampler, simple scheduler, denoise 1.0 and a positive prompt only.

  • Option A, one file: put the 40 GB checkpoint in diffusion_models, then add a Qwen3-VL 32B text encoder (int8 or nvfp4) and the VAE from Comfy-Org/MiniMax-H3-Image. No LoRA node is needed.
  • Option B, base plus LoRA: add the 2 GB LoRA through LoraLoaderModelOnly at strength 1.0. Any other strength scales the distillation delta. This is the only route for the int8_convrot and w4a8 quantized checkpoints, which cannot take a pre-merge.

The graph in both cases runs Load Diffusion Model into MiniMaxH3SigmaShift (shift_video 12, shift_audio 3), then Basic Guider. The latent is an EmptyHunyuanLatentVideo at your target size, because the H3 image latent is a 1-frame video latent. Ready-made workflow JSON files for both options are in the repo.

The card claims prompt and seed iteration is 2 to 3 times faster per render, since it needs 2 evaluations instead of 6.

How to use the 2-step LoRA for ad creative

The card says the LoRA makes prompt and seed iteration 2 to 3 times faster and gives near-interactive previews at 2 to 4 MP. If that holds on your prompts, it would help with exploring product shots, backgrounds and static ad concepts before you commit to a full-resolution render. The author reports it; we have not seen independent confirmation.

A creative desk with a monitor showing product images changing liveA creative desk with a monitor showing product images changing live

The reported numbers come from an H200, a data center GPU, and the 40 GB checkpoint is large. Most teams will probably try the hosted Space first. No consumer GPU requirements are stated.

For a quicker path to static ad volume without running your own GPU, a managed tool such as the AdGraam Creative Generator builds image ads from a product URL. You can also chain image and upscale models in Flow Builder. Our guide to making static ads with AI covers the broader workflow.

Where a 2-step model could fit in a creative process:

  • Concept sweeps: run many prompt and seed variations of a product scene and keep the few worth a full render.
  • Live art direction: the Space's realtime edit mode redraws a source image as the prompt is typed, per the card.
  • Final renders: the card says full renders and edits at 2, 3 or 4 steps are available up to native 16 MP.

Check your own prompts before relying on it, especially text rendering, product fidelity and label legibility. The card does not address those.

MiniMax-H3-Image 2-step vs stock 6-step

The stock model needs 6 steps and the LoRA needs 2, per the card. The author says the LoRA lands composition, texture and fine detail in those two evaluations, while stock at 2 steps looks unfinished.

SetupStepsGuidanceNotes per card
Stock MiniMax-H3-Image6 (fixed schedule)Guidance-distilledSoft and unfinished if forced to 2 steps
Stock plus pDMD LoRA2 (also 3 or 4 in the Space)No CFGFinished image in 2 evaluations, author's claim

No independent benchmark is cited. Speed claims are the author's, and any quality trade-off against the full 6-step output is not quantified in the available text.

What to watch next

Watch for a MiniMax response, a stated license for the LoRA, and independent side-by-side tests against the 6-step output. Also watch whether the model appears in hosted tools.

It is not announced for the AdGraam Playground yet. The earlier H3Image sighting on Hailuo AI is a useful reference for how the base model first surfaced.

From the timeline

What people are posting

MiniMax-H3-Image in 2 steps, realtime pDMD LoRA on MiniMax's 33B image model realtime editing on ZeroGPU LoRA + one-file ComfyUI checkpoint: https://huggingface.co/akhaliq/minimax-h3-image-pdmd-2step app: https://huggingface.co/spaces/akhaliq/minimax-h3-image-2step https://t.co/fAmVdNFo7s
@_akhaliq2 likesView on X
MiniMax H3-Image 2 step lora Link: https://i.redd.it/4z0qx5tblt0i1.jpeg
u/Illustrious_Row_997115 likesView on Reddit

Key takeaways

  • The LoRA runs MiniMax-H3-Image in 2 denoising steps instead of the stock fixed 6-step schedule.
  • It is a community release from @_akhaliq, not a MiniMax announcement.
  • The base model is 33.1B parameters with native 4096×4096 (16 MP) output.
  • According to the model card, a 2-step frame in the demo Space lands in about 1 to 1.5 seconds at roughly 1 MP.
  • The model card reports about 20 seconds for a 2048² image in ComfyUI on an H200.
  • The one-file ComfyUI checkpoint is 40 GB; the LoRA-only option is about 2 GB.
Run today's top models

Compare 200+ AI video and image models side by side

Run Kling, Veo, Sora, Seedance, Flux, Ideogram and Recraft in one Playground, or turn any product URL into ready-to-launch ads.

Questions, answered

Frequently asked

What is the MiniMax-H3-Image 2-step LoRA?

It is a pDMD 2-NFE LoRA (rank 128 over attention and FFN of all 50 blocks) released by @_akhaliq on Hugging Face. It lets MiniMax-H3-Image produce a finished image in 2 denoising evaluations instead of 6, according to the model card.

Is the 2-step LoRA free to try?

A demo Space, akhaliq/minimax-h3-image-2step, runs on ZeroGPU with realtime previews. The weights are also posted on Hugging Face. License terms are not stated in the model card excerpt.

How do I run it in ComfyUI?

Update ComfyUI to latest master, then either load the 40 GB pre-merged checkpoint or add the 2 GB LoRA at strength 1.0 to the Comfy-Org checkpoint. Use steps 2, euler sampler, simple scheduler and no CFG.

Did MiniMax release this LoRA?

No. It is a community release, and MiniMax has not announced it. The card credits the pDMD method (arXiv 2609.35768) and a ComfyUI conversion by Iwannapose.

What hardware does it need?

The card reports about 17.7 seconds per 4096×4096 image on one H200 (peak 84 GB). Consumer GPU requirements are not stated.

Where this comes from

Sources

  1. akhaliq/minimax-h3-image-pdmd-2step · Hugging Facehuggingface.co

This story is still unconfirmed: it is based on what people are posting, and the company behind it has not announced it yet. We will update this page as it develops.

AI Video & Image Newsminimax h3-imageminimax h3-image 2 step lorapdmd loracomfyui minimax h34096 image modelopen weights image modelrealtime image editing
Keep reading

More AI model news & creative guides

Your move

See your product as a winning ad

Turn a product URL into static ads and UGC-style videos, rebuild the competitor ads that already work, and read your Meta data to know what to make next.

AdGraam News DeskAI video and image news

The AdGraam News Desk (part of AdGraam, also searched as Adgram or Adgram AI) tracks AI image and video model launches, leaks and rumors from labs, leakers and creators, and checks each claim against its sources. Unconfirmed stories say so, and each page is updated as its story develops.

LinkedIn